Home >> News

Lubricating oil filling machine common problem handling

Nov. 23, 2019

There have been many shortcomings in China's filling equipment in the market. With the development of society, the filling machine has become an indispensable packaging machine for the production enterprises. The lubricating oil filling machine has never been recognized until now. The production line has emerged, filling the domestic gap, and has basically met the domestic market demand, and some products are also exported.

However, domestic lubricant filling machines still have some shortcomings: lack of macro overall planning, lack of capital investment, investment in research and development of enterprises account for less than the average level of sales, lack of technical personnel, etc., and in the development of products, Competition in terms of performance, quality, reliability, and service is at a disadvantage.

Guided by the market, we will change the current low-tech content and low-level competition, and eliminate a number of low-efficiency, high-consumption, low-grade, low-value-added, labor-intensive lubricant filling machines, and strive to develop high-efficiency and low-cost production, large-scale complete lubricating oil filling machine equipment for production and sales.

Long-term work of the filling machine will inevitably lead to failure. In order to solve these problems quickly, we need to find solutions to the common conditions of machinery. Avoid the impact of mechanical failure on our production efficiency. The following are the suggestions that our engineers gave us, so that we can learn more about the maintenance of the machine.

1. If the capacity of the vessel to be filled during the filling process of the lubricating oil is relatively large, but the lubricating oil in the filling equipment is not sufficient, this time will lead to instability during the filling of the lubricating oil. Turn off the switch and restart the filling time.

2. When the filling fluid is stable during the filling of the lubricating oil, but the filling amount is not correct, it is necessary to see if the filling channel is blocked by the foreign object. If it is blocked, it will be cleaned up.

3. The lubricating oil filling machine still has oil leakage when it is closed. At this time, it is necessary to repair the orifice, as long as it is repaired and then installed.

Lubricating Oil Filling Machine

Lubricating Oil Filling Machine

4. After opening the lubricating oil filling machine, it does not fill the lubricating oil. At this time, the switch may be damaged or the relay may be loose. Just repair it.

5. To determine the relay is normal, the oil filling is still not able to start normally, this time we must look at the pressure is not in accordance with the use of standards, if you still can not find the problem, the most lubricating oil filling machine will look at the solenoid valve is Not bad.

We all know that the role of lubricating oil in production is important. It greatly reduces the wear between the machines, reduces the damage of the equipment and prolongs the life. At present, the application of lubricating oil has also reached a mature stage. Advanced technologies in other fields are also continuously applied to lubricating oil filling machines, which greatly improves the technical performance of the equipment.