Full-automatic inner ear mask machine
The plane mask machine series can be divided into: the inner ear band mask machine, the outer ear band mask machine, and the strap type mask machine according to the different welding methods and usage methods of the ear band. Make up an integral part of the plane mask.
PRODUCTS DETAILS
Characteristic:
1.The equipment presses non-woven cloth(upper and lower two layers). And fusible spray cloth(middle) into mask sheets.Use the mask lug machine and weld the lug to the mask piece. The mask production can be completed through the above two steps, and the disposable inner ear with four edge flat mask machine. The equipment needs two men to operate it. Easy to use and maintain, the machine has been debugged,can be directly used.
2.The product quality is reliable, the mask is a three-layer (non-woven fabric) structure, which is composed of two layers and a layer of filter mesh inside the spun-bonded non-woven fabric professionally used in medical and health.
3..The machine has a compact structure, small volume and small footprint.
Main Technical Parameters:
Basic parameters
Machinesize | 5600mm(L)×3000mm(W)×1800mm(H) |
Color | Blue is standard color |
Machine weight | ≤5000kg |
The ground bearing | ≤500KG/m2 |
Voltage | 220VAC±5﹪,50HZ, |
powder | 9KW |
Air compressor | 0.5~0.8MPa,dried,filter, |
Flow meter | 400L/min |
Capacity | 60-80PCS/MIN |
Usage environment | 10~35℃ |
humidity | 5-55%HR |
Machine size | 5600mm(L)×3000mm(W)×1800mm(H) |
Color | Blue is standard color |
Machine weight | ≤5000kg |