Jinan Xunjie Packing Machinery

Filling machine One-Head-Liquid-Filling-Machine-DYF

admin — Sun, 25 Nov 2007 09:44:40 +0000

Introduction:
This machine is the semi-automatic piston type pasty liquid filling
This machine is reasonable in design, small and exquisite in model, saving the place, the pneumatic part adopts the pneumatic components of Germany FESTO and Taiwan’s AirTac.
The part contacting materials is made of 316L stainless steel
Both filling volume and filling speed can be adjusted, with high filling accuracy.
Filling head adopts anti-leakage and lifting device

· Parameter:

Item	Parameter
Power supply	220/110V 50/60Hz
Air pressure	0.4-0.6MPa
Filling speed	5-20 Bottles/min
Filling accuracy	<=±1%
Filling range	25-60ml 50-125ml 100-250ml 200-500ml 400-1000ml 900-2500ml 2200-5000ml

Milk filling machines why is too fast!

admin — Mon, 20 Feb 2012 07:12:12 +0000

Milk filling machines is a packaging equipment. there are Milk Filling Machine, Liquid Filling Equipment, Milk Filling Equipment. Bottling machine According to the packaged materials;Water,soda/mineral Water,Oil, Milk,Glass bottle,Pop-top,Cans,Barreled,1/3/5 Gallon,Carbonated Beverage,Tea,Juice,Drink,Wine,Cup, Beer,Linear,Rotary,Liquid filling machine; while classified by automation degree, there are semi-automatic filling

Principle characteristics:
This machine adopts photoelectric automatic control system, unique piston filling in the form of either continuous filling, you can also free filling machine. Horizontal mixing structure, to ensure sufficient mixing of the butter and oil, and greatly improved filling performance and measurement accuracy.
This machine is mainly for the food industry sauce packing design and production, particularly suitable for seasoning with the particles and the concentration of chili sauce, bean paste, peanut butter, sesame butter, jam, butter pot end of the expected, marked oil pot at the end of feeding the substances thick sauce filling.

1, suitable for large particles, chili sauce and hot pot and other materials sauce;
2, filling speed, the fastest 1000ml / sec;
3, so that the butter and oil to fully mixed filling;
4, no gas supply, energy saving;
5, simple structure, easy maintenance;
6, all stainless steel production, health and safety.

Technical parameters:
Speed ??:30-40 beats / min
Capacity measurement :100-500 ml (g) 500 - 1500 ml (g)
Quantitative error: ± 2%
Power supply voltage: 380V 1500W and 550W
Dimensions: 1400 × 600 × 1200
Machine Weight: 250KGmachinery / production line and fully-automatic filling equipment.

Juice, Tea Beverage Heat Filling Machine

admin — Sat, 18 Feb 2012 13:03:24 +0000

The machine is mainly applied for the filling of beverage. Integrating with washing, filling and sealing, it has temperature control device for heat filling and realizes full automation in the whole process, suitable for polyester bottle and plastic bottle filling of juice and tea. The bottle types applicable for various parts are easily, conveniently and rapidly adjustable. It adopts new micro-negative pressure filling, stable and reliable. Compared with the machines of the same specification, the benefit of the machine is larger.

The machine adopts advanced OMRON programmable logic controller (PLC) to control the automatic running of the machine. The input bottle adopts air conveying device; the output bottle adopts adjustable speed way, which combines with the transducer of the host machine making the output bottle running more stable and reliable. The photoelectrical inspection of the running condition of various parts makes a higher automation and convenient operation. It is the ideal first-choice equipment of beverage manufacturers

Washing Workstation	80
Filling Workstation	80
Capping Workstation	18
Production Capacity	34,000B/H (500ml)
Machine Power	?15kw

AXIS Liquid Filling Machine / Equipment For Manufactory

admin — Mon, 13 Feb 2012 08:23:32 +0000

Pressure filling capping 3-in-1 unit machine integrates washing, filling and capping into one unit, can be used for different kinds of fruit juices, tea hot drink production. With only a few parts changed, the machine can also be used for mineral water filling. The advanced micro-negative pressure filling technology is used in this machine. The filling is quick, steady and accurate. The beverage feedback system is well designed, the gas can be fed back separately, has no contact with beverage; reduce the second time pollution and oxidation,Can filling machine apply to the two pieces of aluminum cans filling carbonated beverage. The filling such as cola, soft drink, iced tea and other carbonated beverage etc. It is the ideal equipment of the small and medium-sized beverage filling company
Working Range X/Y/Z(mm): 400/400/100
Load Y-AXIS/Z-AXIS: 10 kg/2 kg
Speed X&Y/Z (mm/sec): 0.1-800/500
Resolution: 0.01 mm/Axis
Repetitive Positioning Accuracy: +/- 0.01 mm/ Axis
Program Capacity: Min 100 Group, 4000 points/group
Data Storage Type: CF Card/PC Storage & USB
Program Display: Teach Pendant LCD
Motor System: 3 Phase Micro-stepping motor
Control Method: PTP & CP
Interpolation Function: 4 axis
Programming Method: Teach pendant/Keyboard
I/O Signals Port: 8 Inputs/8 Outputs
External Control Interface: RS232
Power Supply: AC 110 ~ 220V 300W
Working Temperature: 10 - 40 C
Working Relative Humidity: 20 - 90% no condensation
Dimensions (WxDxH mm): 585 x 600 x 600
Net Weight (kg): 40 kg

Semi-automatic Blowing Machine

admin — Mon, 13 Feb 2012 08:19:19 +0000

Semi-automatic Blowing Machine (one-driven-two)
The machine is a kind of equipment recently introduced by our company to produce PET plastic hollow vessels. With the features of saving energy, less occupation, low investment, quick effect and reasonable structure, it is expansively applied in packaging products of food, drugs, cosmetics, pesticides, chemical agents and soft beverage.

Features:

1.The host machine is equipped with micro computer program controller, convenient for operation.

2.The heater adopts far infrared ray heating tube controlled by inlet controllable silicon; the transmission part adopts three-phrase motor and is driven by transducer.

3. The stretching part of the seal adopts two cylinders both on the left and right; the stretching length is stepless. The delay time of the blowing can be freely adjusted, beneficial for the product molding.

4.The waste gas within the machine is discharged through the muffler, reducing the noise.

5.The host machine is equipped with air reservoir as well as high and low pressure reducing valves

Semi-automatic CIP Cleaning Machine

admin — Mon, 13 Feb 2012 08:00:40 +0000

This CIP cleaning system is mainly applied for cleaning the tubes, cans and filling machinery directly contacted with materials. Connections with bottle cleaning machine, sealer and filling machine are manually optional to make up automatic cleaning device. With high temperature and high concentration cleaning agent, strong force is added to the equipment, making various zones of the equipment sprayed with water of different temperatures. Without dismantling or moving the device, the surface directly contacted with food can be cleaned and achieves certain cleaning effect. It not only improves product safety and better protects operation safety, but also saves water and vapor and reduces the detergent dosage. It is the ideal first-choice cleaning equipment of beverage manufacturers

Washing Filling Capping Machine (3-in-1)

admin — Mon, 13 Feb 2012 07:57:54 +0000

The machine is mainly applied for the filling of beverage. Integrating with washing, filling and sealing, it realizes full automation in the whole process, suitable for polyester bottle and plastic bottle filling of mineral water and purified water. The bottle types applicable for various parts are easily, conveniently and rapidly adjustable. It adopts new micro-negative pressure filling, stable and reliable. Compared with the machines of the same specification, the benefit of this machine is larger.

Pillow Weight Setting Filling Machine

admin — Wed, 14 Sep 2011 12:57:26 +0000

Pillow weight setting filling machine BC1015
Model
BC1015 Fiber carding machine
BC1001-790 Fan feeding machine
BC503 Fiber storage
BC2003 Filling machine
BC502-2
Dimensions(mm)(L*W*H) 2150*1150*980 1110*750*3000 1110*750*3000 3350*1900*1450
Power 6.25KW 0.2kw 0.2kw 4.74kw
Net weight 800KG 350kg 350kg 400kg
Capacity 160-190KG/H

More safety: The fiber carding machine has metal detector and overloading alarm system to avoid the machine being damaged.

Cost-saving: Place an additional bale opening machine, it only needs one person to run the whole line. Two heads filling machine with patting devices ensure the high speed and top-quality filling.

This line can set the weight for each pillow/cushion

Automatic Beverage Filling Machine

admin — Wed, 14 Sep 2011 12:55:49 +0000

BW-2200B type gable top carton filling machine is automatic with top configuration. The entire machine is made of food-grade stainless steel, and the surface is special processed to be beautiful.

1. Work flow:

Put cardboard into carton holder (manually) — Bottom preforming — Bottom heating and sealing — Ultrasonic capping (Optional) — Filling — Top preforming — Top heating and sealing — Date printing — Finished product

The whole process is controlled by PLC, and only need one person to operate.

2. Suitable for filling:

Various kinds of juice, such as acid juice, tea drink, corn drink, soy milk, pure water, etc.

Capacity	250–1000ml, 1000ml-2000ml (can be filled by one machine)
Output	1800-2500 cartons/h
Packing material	B Type aluminium foil carton
Shelf life	3 to 12 months
Capping	With capping (Optional)
Filling temperature	88 to 92 degree centigrade
Overall power	25KW (three phases of electricity)
Compressed air	Pressure: 1.0-1.4 Mpa	Flow rate: 1.4-2M 3 /min
Cooling water	Flow volume: ?40L/ min	Temperature: ?30°C
Size: (LWH)	3.7m1.6m2.8m
Net Weight	3500kg
Installation requirement	Any smooth floor, such as cement, floor tile, plastic ground, etc. Do not need to make angle.

Mineral Water Filling Machine

admin — Wed, 14 Sep 2011 12:52:35 +0000

Pure/Mineral Water Production Line(Water Filling Machine)

This series equipment is used in the production of non-carbonated drink, such as mineral water and purified water, etc. Washing, filling and capping are integrated into one machine.

(1) The suspending bottle-neck clamping design make the bottle stable during the high-speedmoving conditions. By changing a few parts, it can meet the need of production of different types of bottles easily.
(2) The new generation of stainless steel grab is adopted and the grabs have no contact with the area above the bottle”s screw thread. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
(3) The advanced gravity filling technology used in this machine makes the filling quick, steady and accurate.
(4) Magnetic torque is used for screw capping, and the power of screw capping can be adjusted steplessly. Capping is reliable and do no harm to the caps.
(5) Advanced technologies, such as human-machine interface touch-screen and PLC program control are adopted in this machine.
(6) All parts that have direct contact with the water are made of high quality stainless steel. The critical electrical components are from famous international companies, such as Mitsubishi, Omron to name a few.